Trinity Hills, Naruvamoodu P.O, TVM- 695528
+91-08606979701

RESEARCH

 

 

The Projects & Publications Center (PPC) will coordinate and improve the quality and content of all projects and publications, both internal and external, of the college. The Center will have the following responsibilities:

 

  1. To guide and mentor, the faculty and student teams involved in various course related, external agency sponsored or industry related projects being undertaken on the campus. Periodically meet with faculty guides and faculty project coordinators to ensure their progress.
  2. To select and monitor specific final year projects that can produce journal publications and conference publications. At least 4 journal publications and 8 conference presentations should be the target for each academic year.
  3. To ensure that as much as possible the second semester design and engineering course projects can be followed up for the fifth semester design project which will lead to the final year project.
  4. To supervise the production of high quality presentation material (videos, posters, demos etc) based on the projects
  5. Organize project exhibitions for S2 and S8 projects towards the end of even semesters with industry expert judges and prize money.
  6. To create and maintain spaces on campus for preserving previous projects.
  7. To mentor research minded and high caliber students towards higher education and product development goals.
  8. To daily update the college community about various project and publication activities in the campus.
  9. To ensure college website is updated with Project news, Project summaries, photographs and videos.
  10. Prepare and pass on press releases based on successful and innovative projects. Different online portals and online portals should also be considered for getting maximum coverage.
  11. To initiate the recognition of Intellectual Property created through the projects. Help in patent search, filing, etc
  12. Create press releases for various notable events organized on campus or by various campus associations.
  13. Strictly monitor the quality, formatting and presentation of all the project reports created on campus.
  14. Create Memorandums of Understanding with various educational and research institutions, national and international, as well as industry partners aimed towards project work, knowledge sharing and industrial visits etc. MoUs with software and hardware vendors to provide student versions and free support for their products and services on campus.
  15. MoUs signed with our college should be used for maximum benefit to our students and faculties. Press releases should be done immediately after signing the MOU’s to get maximum coverage. MoUs should be prominently featured on the college website as well as physical locations on campus.
  16. External projects taken should be assigned to different faculty teams according to their expertise and specialization. Identify external R&D partners for tie up for each project.
  17. LinkedIn profile for the college should be created and regularly updated.
  18. Conduct orientation on the importance of publications and plagiarism for selected 3rd year students. By the end of second semester, students should be identified and categorized according to their goal after graduation be it higher studies, entrepreneurship, industry placement etc.
  19. To utilize the infrastructure at our computer labs to benefit our students through exposure to the latest software in the industry. Use the Skill Delivery Platform Kerala facility to provide training to our students in the latest technology through government and private channels.
  20. Organize regular expert interactions on campus for select audience
  21. To plan, prepare and execute one annual signature Conclave/ Conference on engineering, technology, education and entrepreneurship with international participation.

Students Projects 2021

 

Project Name
Principal Investigator
Canal Plastic Waste Management System Mr. Karthik Narayanan
Portable electric grass trimmer Mr. R Cahndrasekar
Fabrication of 3D printing Module for CNC machine Mr. Vipin Gopan
Automobile Collision Detection and Alert System Mr. Kannan S
Automatic Gas booking System Mr. Vipin Gopan
BIM for facilitating construction safety planning at job site Mr. Adarsh MS
Partial replacement of coarse aggregate using E-waste and polypropylene as admixture in concrete Mr.Alex Tharun
Experimental analysis of bitumen with shredded surgical mask and EPS beads Mr.Nitin S
Comprehensive analysis of polypropylene added concrete with conventional concrete Mr.Alex Tharun PJ
Soil stability analysis using plaxis on Trinity parking area and design of retaining wall Mr.Vijith VS
Experimental investigation on the effect of sisal fibre reinforced concrete Mrs.Hima S
Fiber brick Mr.Vijith VS
Influence of Surkhi on various properties of concrete pavement Mr.Arjun S
Water quality tester Mrs.Ananthalekshmi ML
Solution for water logging Mr.Arjun S
Replacing Grid Interface Transformer in WECs with solid State Transformer Mr. Rakesh R
Bidirectional Current Fed Half Bridge (C)(LC) Configuration for Inductive Wireless Power Transfer System Ms. Sabitha A R
Brain Wave Controlled Deformable Wheel Chair Mr. Vijeesh V S
Wireless Charging in Electric Vehicles Ms. Indu V G
Solar Powered Electric Charging Station with Energy Storage system and Grid Support Ms. Anuvinda S M
Control of Linear Actuator for Stewart Platform Based Parallel Manupulator Mr. Lineesh AS
Implementation of bldc motor control system using matlab Gayathri rema narayan
Facemask detection and social distance monitoring by using open cv Blesson mathew luke
Battery fault detection of electric vehicles by using machine learning. Nishi s das
Advance menu ordering management system using php& maql. Blesson mathew luke
IoT based smart safety monitoring system for sewage workers. Anu s narayan

2020 Funded Projects

Project Name
Principal Investigator
Students
Flood and Landslide disaster prediction using internet of things and machine learning Mr. Lineesh A S Arunima R S,Amrutha,Sourav Sunil, Kurian Antony K
Control system for simultaneous operation of super capacitor battery driven electric vehicle Mr. Rakesh R Akhil S, SumithBabu SM, U Ajay Krishnan, VJ Anand
GSM/ IOT-Integrated Circuit Breaker (GICB)

for flood and other natural disasters

Mrs. SabithaAR Sooraj AS,Ajeesh PK, Aswin S Nair, Nidhin MS
AVR Automatic Weed Remover Mrs.Archana S Reahma L Uthanapadan, Jesssica M Joshy, Akhila S R, Mahesh M
Automatic Tranformer control of LT CB switch using IoT Mr. Blesson Mathews Luke Lekshmi B Nair , Himadhara Putharan SO, Adhila SR Mahesh M
Access a website login page from a particular area only-Value Variable Password(VVP) Mrs.Nishi S Das Thuhina Thulasi, Karthika MR, Prince Thomas, Rajeevan AB
Design Testing and Analysis of Car Bumper Using Carbon Fiber Reinforced Plastic And Epoxy Resin Mr.Anand Michael Akhl SJ, Anandhu B, Anandu RJ, Shijjo SJ
3D Printing Module for CNC Machine Mr.Vipin Gopan Seby Sebastian, Sachin K Saji, Krishnakesh VM, Vishnu Pradeep

Funded Projects

Project Name
Principal Investigator
Students
Reversing Mechanism for Two Wheelers of physically disabled persons Mr. Vipin Gopan Sajin U P, Indrajith, Naif, Abhijith M S
Microbial Fuel Cell Mrs. Viji V K Reshma Revikumar, Anoopa, Silpa

Students Projects

Project Name
Principal Investigator
Reversing Mechanism for Two Wheelers of physically disabled persons Mr. Vipin Gopan
Prediction of optimum grinding wheel dressing time using Artificial Neural Network Mr. Vipin Gopan
Design and fabrication of subsonic wind tunnel Mr. Ananad A J
Design and fabrication of Junkyard Robots specially for Robo wars Mr. Vipin Gopan
Design and Fabrication of plastic recycling machine Mr. Rahul V R
Plate to Ground Super Capacitance Energy Storage System Mr. Vijeesh
Automation of Generator Mr. Vijeesh

Faculty Projects

Project Name
Principal Investigator
Reversing Mechanism for Two Wheelers of physically disabled persons Mr. Vipin Gopan
Prediction of optimum grinding wheel dressing time using Artificial Neural Network Mr. Vipin Gopan
Design and fabrication of subsonic wind tunnel Mr. Ananad A J
Design and fabrication of Junkyard Robots specially for Robo wars Mr. Vipin Gopan
Design and Fabrication of plastic recycling machine Mr. Rahul V R
Plate to Ground Super Capacitance Energy Storage System Mr. Vijeesh
Automation of Generator Mr. Vijeesh

R&D labs

iva robotics
acsia technologies